Go to content

Main menu:

Products > Voice > Avaya

Avaya IP500 Analog Trunk 4 Features
 
  • Connects to IP500 base card - When connected to IP500 base card, it provides 4 loop-start analog trunk ports
  • Also provides DTMF, caller ID (ICLID), busy tone detection
  • Adjustable echo cancellation - Selectable to Off, 8, 16, 32, 64, and 128 milliseconds
  • Power Failure Transfer - When fitted to an IP500 analog phone base card. During power failure, the first extension port (port 1) is connected to the first analog trunk (port 9)
  • Maximum - 4 per IP500 control unit

Avaya IP500 Analog Trunk 4 V2 Features
  
  • Connects to IP500 base card - When connected to IP500 base card, it provides 4 loop-start analog trunk ports
  • Also provides DTMF, caller ID (ICLID), busy tone detection
  • Adjustable echo cancellation - Selectable to Off, 8, 16, 32, 64, and 128 milliseconds
  • Power Failure Transfer - When fitted to an IP500 analog phone base card. During power failure, the first extension port (port 1) is connected to the first analog trunk (port 9)
  • Maximum - 4 per IP500 control unit

  Changes from V1 to V2
  
  • Echo Cancellation
  • Service Status/Line Status Indication
  • Impedance Matching

Avaya IP500 Universal   PRI 1 Features
  
  • Daughter board that installs on IP500 base card
  • Ports/Channels - 1 PRI trunk port. Connections via port 9 of the host IP500 base card.
  • Supports the following PRI modes:
  •  1) T1 robbed bit (24B channels per port) T1 PRI  (23B+D channels per port)
  •  2) E1 PRI (30B+D channels per port)
  •  3) E1R2 PRI (30B channels per port)
  • Initially supports 8 unlicensed B-channels
  • Additional channels are activated by IP500 Universal PRI licenses
  • Maximum- 4 per IP500 control unit

Avaya IP500 Universal PRI 2 Features
  
  • Daughter board that installs on IP500 base card
  • Ports/Channels - 2 PRI trunk port. Connections via port 9 of the host IP500 base card.
  • Supports the following PRI modes:
  • 1) T1   robbed bit (24B channels per port) T1 PRI             (23B+D  channels   per port)
  • 2) E1 PRI (30B+D channels per port)
  • 3) E1R2 PRI (30B channels per port)
  • Initially supports 8 unlicensed B-channels on each port
  • Additional channels are activated by IP500 Universal PRI licenses
  • Maximum - 4 per IP500 control unit
 
Copyright 2015. All rights reserved.
Back to content | Back to main menu